There are 2 ways to remove the
shift knob - cut it and remove the clip (pictured below), or
pull really hard. The pulling method is easy enough,
and doesn't damage the knob, so it is preferred, but many
people have hurt themselves when the knob comes loose.
The steps below will prevent some pain in the pull method.
The yellow indicates the location of the clip holding the
knob in. It is possible to cut the rubber on the side
of the knob facing the HVAC controls and remove the clip,
but the steps below are recommended instead.
Removal
Step 1:
Sit in the driver's seat
Step 2: Put the shifter in 2nd
gear
Step 3: Put your right hand
around the front of the knob, as pictured. This
somewhat awkward positioning will give you control of the
knob as it comes off, keeping you from hitting yourself in
the head, or breaking your dome light (as many have done
before).
Step 4: Put your left hand
over your right one, and pull hard.
This is what's left with the knob removed
